Recommendations before installing the antenna:
1. Check that the antenna can be installed without any problem in the location provided by Ixorigue.
2. Before heading to the field to assemble the antenna and the other components, be clear about all the materials you will need. To do this, we recommend looking at the entire manual before starting the assembly.
3. We recommend bringing as much as possible assembled and organized from home. Thus, in the field, you will only have to anchor the components to the pole.
4. The proper orientation of the solar panel is towards the south (south east or south west would also be suitable, depending on the area and location of the installation)
1. Package Contents
We recommend mounting the antenna at home and taking it to the field ready for installation on the pole.
2. Assembling the components
1 - Fix the solar panel on the bracket with the 6 screws from bag #3.
2 - Place and tilt the solar panel on the arm of the bracket with the four screws in bag #4. First fix screw number 1 and then screw screw 2 into the hole with the desired inclination. We recommend tilting the panel at 45º, although depending on the place of installation and time of year you can use 15º or 75º In daylight hours, the panel has to be in a straight line with the sun to obtain the maximum amount of energy.
3 - Screw the router into the bracket with the four screws (bag screws #1). We recommend placing the top screws first and continuing with the bottom ones.
4 - The placement and fixing of the antenna can be done in two ways, directly on the support arm (figure 1) or with the clamps included to fix it on the mast (figure 2). If you can install all the equipment at the top of the mast (we recommend about 3 meters), it is enough to fix the antenna on the arm), however, if the equipment is at a lower height and the antenna can be installed on the mast at a higher height, it is recommended to install it in this way.
5 - Connect the antenna cable, from the antenna to the metal connector of the router.
6 - Fasten the support on a mast with the metal ties or on the wall.
7 - Connect the solar panel cable to the router and check that the equipment is turned on correctly.
8 - Notify the Ixorigue technical team (by WhatsApp or phone) and send photos of the installation so that its correct operation and installation can be validated.